🏡

<aside> 💡 4 bit OTP

• VLN3P(NY3P) series
• VLN4P(NY4P) series
• VLN5P(NY5P) series

</aside>

<aside> 💡 32 bit OTP+Flash

• VLN1M(NX11M) series </aside>

<aside> 💡 32 bit Embedded Flash

• NX11FS series
• NX11FM series </aside>

<aside> 💡 32 bit Recording

• VLN3M(NX13M) series </aside>

<aside> 💡 Items

• COB
• Module
• Product </aside>

<aside> 💡 Audio Amp

• VLN9A(NY9A) series </aside>

<aside> 💡 Motor driver

• VLN9M(NY9M) series </aside>

<aside> 💡 Touch

• VLN9T(NY9T) series </aside>

<aside> 💡 Miscellaneous

• miscellaneous </aside>

Audio Amplifier SOP 8pins

Audio Amplifier

The VLN002-9S8EA are mono audio power amplifier CMOS ICs. They are designed by LSI high technology with a low-power and low-cost process. Less peripheral components are required in application. VLN002-9S8EA is a Bridge-Tied Load (BTL) or a Single-Ended (SE) power amplifier with headphone support. It is capable of delivering 2.5W of average power to a 4Ω load or 3.0W of average power to a 3Ω load with less than 10% distortion (THD+N) from a 5V power supply

Feature

(1). Wide operating voltage range: VDD = 1.8V ~ 6.8V. (2). VLN002-9S8EA: Bridge-Tied Load (BTL) or Single-Ended (SE) modes operation. (3). High output power: POUT is 2.5W for VDD = 5V, Load =4Ω, f = 1kHz and THD+N = 10%. (4). Low standby (shutdown) current. (Typ.=0.1uA) (5). No output coupling capacitors, snubber networks or bootstrap capacitors required. (6). BTL output can directly drive capacitive loads such like piezo-buzzer. (7). Built-in auto Ramp-up/ Ramp-down circuit to minimize the turn-on and turn-off pop noise. The time of Ramp-up/ Ramp-down can be adjusted by Cb bypass capacitor. (8). Built-in Thermal Shutdown (TSD). (9). High 5KV Human Body Mode (HBM) ESD protection. (10). ESOP-8 package type is available.

<aside> 💡 pin assignment

</aside>

<aside> 💡 application circuit

</aside>

<aside> 💡 datasheet

</aside>

VLN002-9S8EA_v1.01.pdf

VLN002-9S8EA_v1.01.pdf

go to top

go to home